查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 9 固件版本
车辆数据
| 品牌 | VOLKSWAGEN |
| 型号 | AMAROK MK1 |
| 发动机 | 3.0L TDI V6 190kW/255HP EDC17CP54 |
| 原厂功率 | 258 CV / 19 kW |
| 排量 | 3000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17CP54 |
| 存储 / EPROM | Micro TC1793 + Flash esterna M58BW032FB |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Basic torque management at engine cranking
- Injection opening time related to inj. pressure
- J
- Injection 2
- Injection 3
- Injection 4
- Injection 5
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Speed limiter
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for fuel overheating
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure
- Driver torque request
- Driver torque request 2
- Torque limiter for selected gear
固件标识 (9)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.94.024 | 2H6997311E 0003 |
BOSCH EDC17CP54 |
| — | — |
1.94.010 | 2H6907311AC 0001 |
BOSCH EDC17CP54 |
| — | — |
1.94.017 | 2H6997311G 0002 |
BOSCH EDC17CP54 |
| — | — |
1.94.008 | 2H6907311F 0002 |
BOSCH EDC17CP54 |
| — | — |
1.94.017 | 2H6907311Q 0001 |
BOSCH EDC17CP54 |
| — | — |
1.94.030 | 2H6907311P 0001 |
BOSCH EDC17CP54 |
| — | — |
1.94.015 | 2H6907311AB 0001 |
BOSCH EDC17CP54 |
| — | — |
1.94.012 | 2H6997311F 0003 |
BOSCH EDC17CP54 |
| — | — |
1.94.024 | 2H6907311K 0002 |
BOSCH EDC17CP54 |
ECU 说明
Micro Infineon Tricore TC1793 + External Flash M58BW032FB This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata
