TOYOTA YARIS (XP90) 1.3L 16V VVT-i 74kW/99HP DENSO

ECU DENSO 275036-5280 · 101 CV (74 kW) · 1300 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA YARIS (XP90) 1.3L 16V VVT-i 74kW/99HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 7 固件版本

车辆数据

品牌TOYOTA
型号YARIS (XP90)
发动机1.3L 16V VVT-i 74kW/99HP DENSO
原厂功率101 CV / 74 kW
排量1300 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-5280
存储 / EPROMMICRO NEC 76F0085 - 8192 Kbit - 100000

可用的调校选项:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • L
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

固件标识 (7)

硬件号软件号 (chip)版本升级软件ECU
89663-0D582- 1.67.00530D58200 DENSO 275036-5280
89663-52S00- 1.67.007352S0000 DENSO 275036-5280
89663-0D870- 1.67.02830D87000 DENSO 275036-5280
89663-0D581- 1.67.00630D58100 DENSO 275036-5280
89663-0D880- 1.67.00730D88000 DENSO 275036-5280
89663-02E61- 1.67.005302E6100 DENSO 275036-5280
89663-0D860- 1.67.01130D86000 DENSO 275036-5280

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata