TOYOTA LAND CRUISER PRADO (J120) 3.0L L4 16V D-4D 120kW/161HP DENSO

ECU DENSO 175822-666 · 163 CV (12 kW) · 3000 cc · Diesel sovralimentato

ECU 数据库TOYOTA › TOYOTA LAND CRUISER PRADO (J120) 3.0L L4 16V D-4D 120kW/161HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 6 固件版本

车辆数据

品牌TOYOTA
型号LAND CRUISER PRADO (J120)
发动机3.0L L4 16V D-4D 120kW/161HP DENSO
原厂功率163 CV / 12 kW
排量3000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商DENSO
型号175822-666
存储 / EPROMMICRO NEC 76F0040GD - 512 Kbit - 80000

可用的调校选项:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • EGR valve control
  • EGR valve control 2
  • Variable boost pressure 1
  • Variable boost pressure 2
  • Injection correction 2
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Max injection limit
  • Max injection limit for APS/BPS sensor
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • J
  • Torque limiter
  • Speed limiter
  • Maximum possible engine charge
  • Maximum relative engine air charge
  • Specific injection pressure limiter
  • Specific injection pressure
  • Q
  • Air mass flow
  • Driver torque request
  • Variable geometry duty cycle limit

固件标识 (6)

硬件号软件号 (chip)版本升级软件ECU
89663-60511- 1.00.09136051100 DENSO 175822-666
89663-60500- 1.00.00836050000 DENSO 175822-666
89663-60A10- 1.67.006360A1000 DENSO 175822-887
89663-60A11- 1.67.004360A1100 DENSO 175822-887
89663-60R30- 1.51.005360R3000 DENSO 275922-022
89663-60G20- 1.67.018360G2000 DENSO 275922-022

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU located behind the glove compartment. Difficulty: medium.

ECU 说明

Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop