TOYOTA RAV4 (XA30) 2.0L 16V 116kW/156HP DENSO

ECU DENSO 275036-6941 · 158 CV (116 kW) · 2000 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA RAV4 (XA30) 2.0L 16V 116kW/156HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 4 固件版本

车辆数据

品牌TOYOTA
型号RAV4 (XA30)
发动机2.0L 16V 116kW/156HP DENSO
原厂功率158 CV / 116 kW
排量2000 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-6941
存储 / EPROMMICRO NEC 76F0040GD - 512 Kbit - 80000

可用的调校选项:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
89663-42590- 1.51.01434259000 DENSO 275036-6941
89663-42B80- 1.67.027342B8000 DENSO 275922-5280/5380
89663-42F52- 1.67.004342F5200 DENSO 275922-5280/5380
89663-42B82- 1.67.009342B8200 DENSO 275922-5280/5380

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata