TOYOTA PROACE Mk2 2.0L 16V HDI 110kW/150HP DCM7.1A

ECU DELPHI DCM7.1A · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库TOYOTA › TOYOTA PROACE Mk2 2.0L 16V HDI 110kW/150HP DCM7.1A

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 7 固件版本

车辆数据

品牌TOYOTA
型号PROACE Mk2
发动机2.0L 16V HDI 110kW/150HP DCM7.1A
原厂功率150 CV / 11 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型LCV

ECU

制造商DELPHI
型号DCM7.1A
存储 / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848Kbyte

可用的调校选项:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure limit control
  • Boost pressure
  • Boost pressure F (temperature)
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Load / throttle position reference 3
  • Max exhaust gas temperature curve for full load
  • Exhaust gas temperature threshold for component protection
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 10
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection period 9
  • Injection opening time related to inj. pressure
  • Injection 1
  • J
  • Injection 3
  • Injection 4
  • Injection 5
  • Injection 6
  • Injection 7
  • Torque limiter
  • Torque limiter for diagnostic
  • Torque limiter for smoke limitation
  • Torque limiter for smoke limitation 2
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum indicated virtual torque 2
  • Maximum engine power
  • Throttle air mass flow calculation
  • Throttle air mass flow calculation 2
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Max torque profile for IAT sensor
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Specific injection pressure 6
  • Specific injection pressure 7
  • Specific pressure injection after starting
  • Specific pressure injection after starting 2
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request from MAP sensor - interpolation
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor
  • Take-off torque law from MAP sensor

固件标识 (7)

硬件号软件号 (chip)版本升级软件ECU
98180350809818035080 1.00.0029694566080 DELPHI DCM7.1A
98180350809818035080 1.00.0029693947180 DELPHI DCM7.1A
98180350809818035080 1.00.0089696871980 DELPHI DCM7.1A
98180350809818035080 1.00.0079693562280 DELPHI DCM7.1A
98180350809818035080 1.00.0069695176080 DELPHI DCM7.1A
98333465809833346580 1.00.0109695495780 DELPHI DCM7.1A
98333465809833346580 1.00.0079694867680 DELPHI DCM7.1A

ECU 说明

Microprocessor TC297TP_96 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata