TOYOTA PRIUS (XW20) 1.5L 16V L4 57kW/76HP DENSO

ECU DENSO 275036-5650 · 77 CV (57 kW) · 1500 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA PRIUS (XW20) 1.5L 16V L4 57kW/76HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 5 固件版本

车辆数据

品牌TOYOTA
型号PRIUS (XW20)
发动机1.5L 16V L4 57kW/76HP DENSO
原厂功率77 CV / 57 kW
排量1500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-5650
存储 / EPROMMICRO NEC 76F0085 - 8192 Kbit - 100000

可用的调校选项:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • % relative air filling limit depending on IAT
  • Exhaust gas temperature sensor
  • Exhaust gas temperature sensor 2
  • Variable valve timing - inlet
  • Variable valve timing - outlet

固件标识 (5)

硬件号软件号 (chip)版本升级软件ECU
89663-47430- 1.67.00934743000 DENSO 275036-5650
89663-47070-A 1.67.01434707000 DENSO 275036-7780
89663-47070- 1.67.00434707000 DENSO 275036-7780
89663-47121- 1.67.00634712100 DENSO 275036-7780
89663-47080-A 1.67.02634708000 DENSO 275036-7780

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata