ECU 数据库 ›
TOYOTA › TOYOTA LAND CRUISER PRADO (J150) 3.0L L4 16V D-4D 140kW/188HP DENSO
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 9 固件版本
车辆数据
| 品牌 | TOYOTA |
| 型号 | LAND CRUISER PRADO (J150) |
| 发动机 | 3.0L L4 16V D-4D 140kW/188HP DENSO |
| 原厂功率 | 190 CV / 14 kW |
| 排量 | 3000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | DENSO |
| 型号 | 275922-022 |
| 存储 / EPROM | MICRO NEC 76F0085 - 8192 Kbit - 100000 |
可用的调校选项:
- Boost pressure limiter for diagnostics
- Boost pressure limiter
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- EGR valve control
- Variable boost pressure 1
- Injection correction 2
- Injection period
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- Max injection limit for APS/BPS sensor
- Max injection limit - limp mode
- Injection correction
- Injection correction for IAT sensor
- J
- Injection 2
- Torque limiter 2
- Torque limiter
- Speed limiter
- Maximum possible engine charge
- Maximum relative engine air charge
- Specific injection pressure limiter
- Specific injection pressure
- Specific injection pressure 3
- Air mass flow
- Driver torque request
- Variable geometry duty cycle limit
固件标识 (9)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | 89663-60M80- |
1.67.009 | 360M8000 |
DENSO 275922-022 |
| — | 89663-60G91- |
1.67.012 | 360G9100 |
DENSO 275922-022 |
| — | 89663-60R61- |
1.67.006 | 360R6100 |
DENSO 275922-022 |
| — | 89663-60M91- |
1.67.002 | 360M9100 |
DENSO 275922-022 |
| — | 89663-60R50- |
1.67.008 | 360R5000 |
DENSO 275922-022 |
| — | 89663-60M81- |
1.67.005 | 360M8100 |
DENSO 275922-022 |
| — | 89663-60G90- |
1.67.017 | 360G9000 |
DENSO 275922-022 |
| — | 89663-60M90- |
1.67.013 | 360M9000 |
DENSO 275922-022 |
| — | 89663-60R60- |
1.67.006 | 360R6000 |
DENSO 275922-022 |
车辆技术说明
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU 说明
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
