TOYOTA IQ (AJ10) 1.0L 12V VVT-i 50kW/68HP DENSO

ECU DENSO 211841-3781A890 · 68 CV (5 kW) · 1000 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA IQ (AJ10) 1.0L 12V VVT-i 50kW/68HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 9 固件版本

车辆数据

品牌TOYOTA
型号IQ (AJ10)
发动机1.0L 12V VVT-i 50kW/68HP DENSO
原厂功率68 CV / 5 kW
排量1000 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号211841-3781A890
存储 / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

可用的调校选项:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Injection correction
  • Advance limiter for component protection 1
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Exhaust gas temperature sensor 2
  • Variable valve timing - inlet

固件标识 (9)

硬件号软件号 (chip)版本升级软件ECU
89663-74400- 1.67.02137440000 DENSO 211841-3781A890
89663-74042- 1.67.00537404200 DENSO 211941-37900830
89663-74181- 1.67.01037418100 DENSO 211941-37900830
89663-74034- 1.67.00837403400 DENSO 211941-37900830
89663-74041- 1.67.00837404100 DENSO 211941-37900830
89663-74040- 1.67.02237404000 DENSO 211941-37900830
89663-74061- 1.67.01937406100 DENSO 275036-9170
89663-74062- 1.67.00937406200 DENSO 275036-9170
89663-74060- 1.67.00537406000 DENSO 275036-9170

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata