TOYOTA COROLLA (E140/E150) 2.0L L4 16V XEI VVT-i 112kW/150HP DENSO

ECU DENSO 211941-37000930 · 152 CV (112 kW) · 2000 cc · Benzina sovralimentato

ECU 数据库TOYOTA › TOYOTA COROLLA (E140/E150) 2.0L L4 16V XEI VVT-i 112kW/150HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 4 固件版本

车辆数据

品牌TOYOTA
型号COROLLA (E140/E150)
发动机2.0L L4 16V XEI VVT-i 112kW/150HP DENSO
原厂功率152 CV / 112 kW
排量2000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商DENSO
型号211941-37000930
存储 / EPROMMICRO NEC 76F0039GD - 512 Kbit - 80000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • % relative air filling limit depending on IAT
  • Exhaust gas temperature sensor
  • Exhaust gas temperature sensor 2
  • Variable valve timing - inlet

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
89663-12421- 1.51.01331242100 DENSO 211941-37000930
89663-02L10- 1.67.010302L1000 DENSO 275036-4820
89663-02L11- 1.67.013302L1100 DENSO 275036-4820
89663-02L12- 1.67.014302L1200 DENSO 275036-4820

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata