TOYOTA COROLLA (E140/E150) 2.0L 16V D-4D 93kW/125HP DENSO

ECU DENSO 176522-762 · 126 CV (93 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库TOYOTA › TOYOTA COROLLA (E140/E150) 2.0L 16V D-4D 93kW/125HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 4 固件版本

车辆数据

品牌TOYOTA
型号COROLLA (E140/E150)
发动机2.0L 16V D-4D 93kW/125HP DENSO
原厂功率126 CV / 93 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商DENSO
型号176522-762
存储 / EPROMMICRO NEC 76F0039AGD - 512Kbit - 80000

可用的调校选项:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure 2
  • EGR valve control
  • EGR valve control 2
  • Variable boost pressure 1
  • Variable boost pressure 2
  • Injection correction 2
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Max injection limit
  • Max injection limit for APS/BPS sensor
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • Maximum possible engine charge
  • Main injection
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 3

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
89663-02452- 1.67.00930245200 DENSO 176522-762
89663-02575- 1.67.00330257500 DENSO 176522-762
89663-02572- 1.67.00830257200 DENSO 176522-762
89663-02E53- 1.67.008302E5300 DENSO 275922-022

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata