TOYOTA COROLLA (E140/E150) 1.8L L4 16V VVT-i 104kW/141HP DENSO

ECU DENSO 275036-1152 · 141 CV (104 kW) · 1800 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA COROLLA (E140/E150) 1.8L L4 16V VVT-i 104kW/141HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 11 固件版本

车辆数据

品牌TOYOTA
型号COROLLA (E140/E150)
发动机1.8L L4 16V VVT-i 104kW/141HP DENSO
原厂功率141 CV / 104 kW
排量1800 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-1152
存储 / EPROMMICRO NEC 76F0039AGD - 512Kbit - 80000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Electronic throttle control
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • Lambda driver wish
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

固件标识 (11)

硬件号软件号 (chip)版本升级软件ECU
89663-02B90- 1.67.015302B9000 DENSO 275036-1152
89663-02C20- 1.67.006302C2000 DENSO 275036-1152
89663-02B70- 1.67.033302B7000 DENSO 275036-1152
89663-02B21- 1.67.021302B2100 DENSO 275036-1152
89663-02K30- 1.67.007302K3000 DENSO 275036-4820
89663-02L40-A 1.67.014302L4000 DENSO 275036-4820
89663-02S21- 1.67.011302S2100 DENSO 275036-4820
89663-02L30- 1.67.007302L3000 DENSO 275036-4820
89663-02S31- 1.67.018302S3100 DENSO 275036-4820
89663-02551- 1.67.00730255100 DENSO 275036-7341
89663-12C70-A 1.51.024312C7000 DENSO 275922-5280/5380

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata