TOYOTA COROLLA (E120/E130) 1.8L 16V XRS 128kW/172HP DENSO

ECU DENSO 275036-4820 · 174 CV (128 kW) · 1800 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA COROLLA (E120/E130) 1.8L 16V XRS 128kW/172HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 7 固件版本

车辆数据

品牌TOYOTA
型号COROLLA (E120/E130)
发动机1.8L 16V XRS 128kW/172HP DENSO
原厂功率174 CV / 128 kW
排量1800 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-4820
存储 / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Electronic throttle control
  • Electronic throttle control 2
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

固件标识 (7)

硬件号软件号 (chip)版本升级软件ECU
89663-02K20- 1.67.005302K2000 DENSO 275036-4820
89663-02590- 1.67.00530259000 DENSO 275036-9300
89663-02320- 1.67.01630232000 DENSO 275036-9300
89663-12B92- 1.51.009312B9200 DENSO 275922-5280/5380
89663-02S51- 1.51.012302S5100 DENSO 275922-5280/5380
89663-02R72- 1.67.026302R7200 DENSO 275922-5280/5380
89663-02S50- 1.51.005302S5000 DENSO 275922-5280/5380

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata