TOYOTA COROLLA (E120/E130) 1.6L 16V VVT-i 81kW/109HP DENSO

ECU DENSO 275036-3740 · 110 CV (81 kW) · 1600 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA COROLLA (E120/E130) 1.6L 16V VVT-i 81kW/109HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 4 固件版本

车辆数据

品牌TOYOTA
型号COROLLA (E120/E130)
发动机1.6L 16V VVT-i 81kW/109HP DENSO
原厂功率110 CV / 81 kW
排量1600 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-3740
存储 / EPROMMICRO NEC 76F0039AGD - 512Kbit - 80000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
89663-02482- 1.67.02230248200 DENSO 275036-3740
89663-02B80- 1.67.032302B8000 DENSO 275036-4820
89663-02E00- 1.67.006302E0000 DENSO 275036-4820
89663-02221- 1.67.00830222100 DENSO 275036-7341

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata