TOYOTA CAMRY (XV40) 2.0L 16V 108kW/144HP DENSO

ECU DENSO 275036-1152 · 147 CV (108 kW) · 2000 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA CAMRY (XV40) 2.0L 16V 108kW/144HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 7 固件版本

车辆数据

品牌TOYOTA
型号CAMRY (XV40)
发动机2.0L 16V 108kW/144HP DENSO
原厂功率147 CV / 108 kW
排量2000 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-1152
存储 / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

固件标识 (7)

硬件号软件号 (chip)版本升级软件ECU
89663-06890- 1.67.00830689000 DENSO 275036-1152
89663-06B40- 1.67.011306B4000 DENSO 275036-1152
89663-06561- 1.67.00730656100 DENSO 275036-1152
89663-06450- 1.67.00830645000 DENSO 275036-1152
89663-06532- 1.00.00830653200 DENSO 275036-1152
89663-06C30- 1.67.012306C3000 DENSO 275036-1152
89663-33590- 1.67.01233359000 DENSO 275036-9540

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0038GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop