TOYOTA AURIS (E150) 2.0L 16V D-4D 91kW/122HP DENSO

ECU DENSO 175822-773 · 124 CV (91 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库TOYOTA › TOYOTA AURIS (E150) 2.0L 16V D-4D 91kW/122HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 6 固件版本

车辆数据

品牌TOYOTA
型号AURIS (E150)
发动机2.0L 16V D-4D 91kW/122HP DENSO
原厂功率124 CV / 91 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商DENSO
型号175822-773
存储 / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

可用的调校选项:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • EGR valve control
  • EGR valve control 2
  • Variable boost pressure 1
  • Injection correction 2
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Max injection limit
  • Max injection limit for APS/BPS sensor
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Maximum possible engine charge
  • Main injection
  • Specific injection pressure
  • Air mass flow
  • Driver torque request
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 3

固件标识 (6)

硬件号软件号 (chip)版本升级软件ECU
89663-02440- 1.67.00630244000 DENSO 175822-773
89663-02U40- 1.51.007302U4000 DENSO 275922-022
89663-02U41- 1.51.010302U4100 DENSO 275922-022
89663-02U21- 1.51.010302U2100 DENSO 275922-022
89663-02U20- 1.51.009302U2000 DENSO 275922-022
89663-02U20- 1.51.012302U2000 DENSO 275922-022

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop