TOYOTA ALPHARD/VELLFIRE (AH20) 3.5L V6 24V 206kW/276HP DENSO

ECU DENSO 275036-2110 · 280 CV (206 kW) · 3500 cc · Benzina aspirato

ECU 数据库TOYOTA › TOYOTA ALPHARD/VELLFIRE (AH20) 3.5L V6 24V 206kW/276HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 7 固件版本

车辆数据

品牌TOYOTA
型号ALPHARD/VELLFIRE (AH20)
发动机3.5L V6 24V 206kW/276HP DENSO
原厂功率280 CV / 206 kW
排量3500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275036-2110
存储 / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

固件标识 (7)

硬件号软件号 (chip)版本升级软件ECU
89663-58101- 1.51.01735810100 DENSO 275036-2110
89663-58480- 1.51.01735848000 DENSO 275036-3560
89663-58250-A 1.67.01835825000 DENSO 275036-4520
89663-58260- 1.67.00435826000 DENSO 275036-4520
89663-58100-A 1.51.00735810000 DENSO 275036-4520
89663-58201- 1.67.00835820100 DENSO 275036-4520
89663-58231- 1.67.00735823100 DENSO 275036-4520

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata