DS DS3 1.6L 16V THP 153kW/205HP MEVD17.4.4

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

车辆数据

ECU

可用的调校选项:

• Base timing
• Optimal spark timing/MBT
• Maximum engine boost pressure F (atmospheric pressure)
• Lambda correction
• Lambda correction for engine temperature after starting
• Lambda correction for engine temperature after starting with Start&Stop
• Load / throttle position reference
• Load / throttle position reference 2
• Load / throttle position reference 3
• Engine filling management
• Exhaust gas temperature
• Factor to correct fuel delivery system
• Weighting map cold-start
• Weighting map cold-start 2
• Weighting map cold-start 3
• Weighting map cold-start 4
• Weighting map cold-start 5
• Weighting map cold-start 6
• Weighting map cold-start 7
• Engine idle vs. ECT sensor
• HFM - pulsation correction factor
• High pressure fuel pump setpoint
• High pressure fuel pump setpoint - full load
• Intake valve lift
• Intake valve lift - cold
• Intake valve lift - full load
• Intake valve lift - idle
• Intake valve lift - cold idle
• Intake valve lift - limit
• Intake valve lift - engine start
• Intake valve lift - start for ECT sensor
• Intake valve lift - VVT/turbo transition
• Initial wastgate dutycycle
• Basic value Lambda sensor
• Torque limiter
• Lambda enrichment - open loop
• Lambda enrichment for components protection
• Lambda enrichment for components protection - high swirl position
• Lambda correction for exhaust manifold temperature
• RPM Limiter
• RPM Limiter 2
• RPM limiter 3
• RPM limit for ECT sensor
• Minimum limitation lambda sensor
• Maximum limitation Lambda sensor
• Lambda driver wish
• Lambda driver wish 2
• Knock detection factor
• Speed limiter
• Speed limiter 2
• Speed limiter 3
• Maximum indicated torque
• Maximum indicated virtual torque
• Maximum boost pressure load
• Throttle air mass flow calculation
• Manifold absolute pressure time delay
• Characteristic manifold absolute pressure time constant of the LRS
• Optimal engine moment
• Pressure ratio depending on IAT
• Pressure ratio depending on IAT 2
• Maximum pressure ratio limit depending on temperature
• Maximum pressure ratio limit depending on ECT
• Requested engine filling
• Driver torque request
• Driver torque request 2
• Driver torque request for high speed
• Driver torque request for low speed
• Driver torque request at the start
• Driver torque request for reverse gear
• Wastegate duty-cycle

固件标识 (3)

ECU 说明

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid TPM - Modulo Aggiuntivo Dimsport +15 % € 399 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

获取该车辆的文件

读写此 ECU 的工具

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 购买 The Genius OBD + Bench € 2.500 购买

其他 DS

→ 所有 ECU DS