DS DS3 1.6L 16V HDI 82kW/110HP SID807 — ECU CONTINENTAL-SIEMENS-VDO SID807

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 8 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

车辆数据

品牌	DS
型号	DS3
发动机	1.6L 16V HDI 82kW/110HP SID807
原厂功率	112 CV / 82 kW
排量	1600 cc
燃料	Diesel sovralimentato
车辆类型	Auto

ECU

制造商	CONTINENTAL-SIEMENS-VDO
型号	SID807
存储 / EPROM	M58BW016DB PQFP80 - Flash 3_V 512 x 32

可用的调校选项:

Boost pressure limiter for diagnostics
Boost pressure limiter
BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
Boost pressure
Boost pressure 2
Boost pressure 3
Boost pressure 4
Load / throttle position reference
Exhaust gas temperature value before turbine in regular injection mode
Injection opening time related to inj. pressure
J
Torque limiter 2
Torque limiter
Intake manifold pressure
Throttle air mass flow calculation
Max torque profile
Specific injection pressure limiter
Specific injection pressure
Driver torque request for high speed
Driver torque request for medium speed
Driver torque request for low speed
Driver torque request at the start
Driver torque request for reverse gear
Torque limiter for EFT sensor
Torque limit table for ECT sensor
Torque model - fuel quantity to torque conversion
Variable geometry duty cycle limit

固件标识 (8)

硬件号	软件号 (chip)	版本	升级软件	ECU
—	—	1.83.006	—	CONTINENTAL-SIEMENS-VDO SID807
9663241480	9666571380	1.83.009	9667331980	CONTINENTAL-SIEMENS-VDO SID807
9663241480	9666571380	1.83.011	9667209280	CONTINENTAL-SIEMENS-VDO SID807
9663241480	9666571380	1.83.042	9678945680	CONTINENTAL-SIEMENS-VDO SID807
9663241480	9666571380	1.83.015	9679193680	CONTINENTAL-SIEMENS-VDO SID807
9663241480	9666571380	1.83.022	9667343380	CONTINENTAL-SIEMENS-VDO SID807
9663241480	9666681180	1.83.012	9678988080	CONTINENTAL-SIEMENS-VDO SID807EVO
9663241480	9666681180	1.83.012	9679157080	CONTINENTAL-SIEMENS-VDO SID807EVO

ECU 说明

This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata