YAMAHA MOTORCYCLES T?n?r? 700 19->20 55kW
ECU DENSO 1WS/1XB/2SX/B34/B4C/BR5/BU2/BW3-8591A-XX · 75 CV (55 kW) · 700 cc · Benzina aspirato
ECU-database ›
YAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES T?n?r? 700 19->20 55kW
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
4 firmwareversies
Verkrijg het bestand voor dit voertuig
Voertuiggegevens
| Merk | YAMAHA MOTORCYCLES |
| Model | T?n?r? 700 |
| Motor | 19->20 55kW |
| Standaard vermogen | 75 CV / 55 kW |
| Cilinderinhoud | 700 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Moto |
ECU
| Fabrikant | DENSO |
| Model | 1WS/1XB/2SX/B34/B4C/BR5/BU2/BW3-8591A-XX |
| Geheugen / EPROM | Micro RENESAS - 8192 Kbit -100000 |
Beschikbare tuning-opties:
- Acceleration enrichment - high gears
- Acceleration enrichment - low gears
- Base timing
- Base timing - clutch/neutral
- Optimal spark timing/MBT
- Coil charge time
- Engine idle vs. ECT sensor
- Injection period
- Injection for IAP
- Injection for TPS
- Basic value setpoint Lambda sensor
- RPM Limiter
- Cooling fan activation
Firmware-identificatoren (4)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| — | 129C35C0 | 1.00.013 | BW31_129C35C0 | DENSO 1WS/1XB/2SX/B34/B4C/BR5/BU2/BW3-8591A-XX |
| — | 129C3000 | 1.00.022 | BW31_129C3000 | DENSO 1WS/1XB/2SX/B34/B4C/BR5/BU2/BW3-8591A-XX |
| — | 129C3040 | 1.00.012 | BW32_129C3040 | DENSO 1WS/1XB/2SX/B34/B4C/BR5/BU2/BW3-8591A-XX |
| — | 129C3580 | 1.00.013 | BW32_129C3580 | DENSO 1WS/1XB/2SX/B34/B4C/BR5/BU2/BW3-8591A-XX |
ECU-notities
Microprocessor SH7058 This Setting File can be used for serial system NewGenius. This serial protocol supports identification and writing only. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.
Microprocessor SH7058 This Setting File can be used for serial system NewGenius. This serial protocol supports identification and writing only. To work on this ECU you can use NewTrasdata
