YAMAHA MOTORCYCLES MT-09 Tracer 900 21->24 88kW
ECU DENSO Bxx-8591A-xx · 120 CV (88 kW) · 890 cc · Benzina aspirato
ECU-database ›
YAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES MT-09 Tracer 900 21->24 88kW
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
33 firmwareversies
Verkrijg het bestand voor dit voertuig
Voertuiggegevens
| Merk | YAMAHA MOTORCYCLES |
| Model | MT-09 Tracer 900 |
| Motor | 21->24 88kW |
| Standaard vermogen | 120 CV / 88 kW |
| Cilinderinhoud | 890 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Moto |
ECU
| Fabrikant | DENSO |
| Model | Bxx-8591A-xx |
| Geheugen / EPROM | Micro RENESAS core RH850 |
Beschikbare tuning-opties:
- AFR full load/WOT
- AFR for IAP
- AFR for TPS
- Base timing
- Optimal spark timing/MBT
- Advance correction
- Allowed speed difference between axles - set A
- Allowed speed difference between axles - set B
- Allowed speed difference between axles - set C
- Coil charge time
- Engine brake
- Engine idle vs. ECT sensor
- Rpm threshold fuel cut
- Rpm threshold fuel cut 2
- Injection for IAP
- Injection for TPS
- RPM Limiter
- Speed limiter
- Optimal engine moment
- Optimal engine moment 2
- Timing cut period by gear
- Timing cut
- Timing cut period
- Throttle angle limitation
- Throttle angle management - correction - mode 1
- TAMCM
- Throttle angle management - correction - mode 3
- Throttle angle management - correction - mode 4
- Throttle angle management - mode 1
- TAMM
- Throttle angle management - mode 4
- Cooling fan activation
- Engine torque limiter depending on vehicle speed
Firmware-identificatoren (33)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| — | 12460041 | 1.00.009 | BAP5_12460041 | DENSO Bxx-8591A-xx |
| — | 12717001 | 1.00.018 | BLG1_12717001 | DENSO Bxx-8591A-xx |
| — | 12165001 | 1.00.026 | B5U1_12165001 | DENSO Bxx-8591A-xx |
| — | 12460081 | 1.00.014 | BAP3_12460081 | DENSO Bxx-8591A-xx |
| — | 127170C1 | 1.00.009 | BLG8_127170C1 | DENSO Bxx-8591A-xx |
| — | 12460040 | 1.00.013 | BAP5_12460040 | DENSO Bxx-8591A-xx |
| — | 12717000 | 1.00.021 | BLG1_12717000 | DENSO Bxx-8591A-xx |
| — | 12460042 | 1.00.018 | BAP5_12460042 | DENSO Bxx-8591A-xx |
| — | 12165080 | 1.00.011 | B5U2_12165080 | DENSO Bxx-8591A-xx |
| — | 12460002 | 1.00.015 | BAP1_12460002 | DENSO Bxx-8591A-xx |
| — | 12460082 | 1.00.014 | BAP3_12460082 | DENSO Bxx-8591A-xx |
| — | 12460182 | 1.00.017 | BAP6_12460182 | DENSO Bxx-8591A-xx |
| — | 124601C2 | 1.00.013 | BAP7_124601C2 | DENSO Bxx-8591A-xx |
| — | 124600C1 | 1.00.014 | BAP9_124600C1 | DENSO Bxx-8591A-xx |
| — | 12460001 | 1.00.019 | BAP1_12460001 | DENSO Bxx-8591A-xx |
| — | 12460003 | 1.00.019 | BAP1_12460003 | DENSO Bxx-8591A-xx |
| — | 12460003 | 1.00.011 | BAP1_12460003 | DENSO Bxx-8591A-xx |
| — | 12165083 | 1.00.009 | B5U2_12165083 | DENSO Bxx-8591A-xx |
| — | 12460181 | 1.00.014 | BAP6_12460181 | DENSO Bxx-8591A-xx |
| — | 12460000 | 1.00.033 | BAP1_12460000 | DENSO Bxx-8591A-xx |
| — | 12165002 | 1.00.013 | B5U1_12165002 | DENSO Bxx-8591A-xx |
| — | 12165081 | 1.00.014 | B5U2_12165081 | DENSO Bxx-8591A-xx |
| — | 12460083 | 1.00.009 | BAP3_12460083 | DENSO Bxx-8591A-xx |
| — | 12165003 | 1.00.005 | B5U1_12165003 | DENSO Bxx-8591A-xx |
| — | 12460043 | 1.00.008 | BAP5_12460043 | DENSO Bxx-8591A-xx |
| — | 12460183 | 1.00.009 | BAP6_12460183 | DENSO Bxx-8591A-xx |
| — | 127170C0 | 1.00.009 | BLG8_127170C0 | DENSO Bxx-8591A-xx |
| — | 124601C3 | 1.00.008 | BAP7_124601C3 | DENSO Bxx-8591A-xx |
| — | 124600C3 | 1.00.009 | BAP9_124600C3 | DENSO Bxx-8591A-xx |
| — | 12717081 | 1.00.009 | BLG2_12717081 | DENSO Bxx-8591A-xx |
| — | 12717041 | 1.00.008 | BLG4_12717041 | DENSO Bxx-8591A-xx |
| — | 12717181 | 1.00.009 | BLG5_12717181 | DENSO Bxx-8591A-xx |
| — | 127171C1 | 1.00.008 | BLG6_127171C1 | DENSO Bxx-8591A-xx |
Technische voertuignotities
OBD placed under the saddle
ECU-notities
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
