VOLKSWAGEN SANTANA 1.8L 8V 70kW/94HP ME7.5

ECU BOSCH ME7.5 · 95 CV (7 kW) · 1800 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN SANTANA 1.8L 8V 70kW/94HP ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelSANTANA
Motor1.8L 8V 70kW/94HP ME7.5
Standaard vermogen95 CV / 7 kW
Cilinderinhoud1800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda driver wish
  • Knock detection factor
  • Air mass flow

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612014411037396274 1.21.00833D907559H 0050 BOSCH ME7.5

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata