VOLKSWAGEN CRAFTER Mk1 2.0L BiTDI 120kW/161HP EDC17C64

ECU BOSCH EDC17C64 · 163 CV (12 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN CRAFTER Mk1 2.0L BiTDI 120kW/161HP EDC17C64

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 7 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelCRAFTER Mk1
Motor2.0L BiTDI 120kW/161HP EDC17C64
Standaard vermogen163 CV / 12 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantBOSCH
ModelEDC17C64
Geheugen / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost limiter correction for APS/BPS sensor
  • Boost limiter correction for APS/BPS sensor 2
  • Protection for cylinder head overheating
  • Maximum torque limitation at clutch
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Engine idle vs. ECT sensor 3
  • Engine idle vs. ECT sensor 4
  • Engine idle vs. ECT sensor 5
  • Injection period
  • Injection period 10
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection period 9
  • Injection period - correction
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Injection 1
  • Injection 2
  • J
  • Injection 4
  • Injection 5
  • Injection 6
  • Injection 7
  • Torque limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Maximum indicated torque
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for fuel overheating
  • Protection for oil overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure limiter for EOT sensor
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific air mass charge
  • Specific air mass charge 2
  • Specific air mass charge 3
  • Specific air mass charge 4
  • Q
  • QC
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Overboost timing 3
  • Overboost timing 4
  • Turbocharger volumetric efficiency

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.94.03303L906021B 7423 BOSCH EDC17C64
1.94.02003L906021C 6713 BOSCH EDC17C64
1.94.01003L906021B 8499 BOSCH EDC17C64
1.94.00703L906021C 9978 BOSCH EDC17C64
1.94.02903L906021A 6711 BOSCH EDC17C64
1.94.01903L906021C 8500 BOSCH EDC17C64
1.94.01703L906021C 7424 BOSCH EDC17C64

ECU-notities

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata