VOLKSWAGEN BORA A4 2.8L VR6 8V 150kW/201HP ME7.1/7.1.1

ECU BOSCH ME7.1.1 · 204 CV (15 kW) · 2800 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN BORA A4 2.8L VR6 8V 150kW/201HP ME7.1/7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelBORA A4
Motor2.8L VR6 8V 150kW/201HP ME7.1/7.1.1
Standaard vermogen204 CV / 15 kW
Cilinderinhoud2800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612073461037366130 1.21.011022906032BL 0011 BOSCH ME7.1.1
02612073471037362580 1.21.011022906032BJ 0002 BOSCH ME7.1.1
02612078811037361454 1.21.013022906032CS 0004 BOSCH ME7.1.1
02612078821037361444 1.21.009022906032CR 0004 BOSCH ME7.1.1
02612078831037363435 1.21.004022906032AD 0001 BOSCH ME7.1.1
02612064861037352424 1.21.014021906018M V05 BOSCH ME7.1/1
02612066181037352480 1.21.015021906018Q V002 BOSCH ME7.1/1
02612068141037360624 1.21.0110219060018R 0004 BOSCH ME7.1/1
02612047391037350063 1.21.022021906018B V06 BOSCH ME7.1/5

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!