SKODA SUPERB (B5) 2.8L VR6 193HP ME7.1/3

ECU BOSCH ME7.1/3 · 196 CV (144 kW) · 2800 cc · Benzina aspirato

ECU-databaseSKODA › SKODA SUPERB (B5) 2.8L VR6 193HP ME7.1/3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkSKODA
ModelSUPERB (B5)
Motor2.8L VR6 193HP ME7.1/3
Standaard vermogen196 CV / 144 kW
Cilinderinhoud2800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1/3
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612085471037369310 1.21.0073B0907551DD 0010 BOSCH ME7.1/3

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.