SKODA OCTAVIA (1U) 1.4L 16V 75/80HP ME7.5.10

ECU BOSCH ME7.5.10 · 1400 cc · Benzina aspirato

ECU-databaseSKODA › SKODA OCTAVIA (1U) 1.4L 16V 75/80HP ME7.5.10

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkSKODA
ModelOCTAVIA (1U)
Motor1.4L 16V 75/80HP ME7.5.10
Cilinderinhoud1400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5.10
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612014061037381469 1.21.007036906032BJ 7980 BOSCH ME7.5.10
02612071241037354885 1.21.007036906032B 3597 BOSCH ME7.5.10
02612071941037360922 1.21.005036906032J 5743 BOSCH ME7.5.10
02612071941037363469 1.21.006036906032J 4413 BOSCH ME7.5.10

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.