SEAT LEON (1P) 2.0L 8V TDI 103kW/138HP EDC16U31

ECU BOSCH EDC16U31/U34/CP34 · 140 CV (103 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseSEAT › SEAT LEON (1P) 2.0L 8V TDI 103kW/138HP EDC16U31

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 14 firmwareversies

Voertuiggegevens

MerkSEAT
ModelLEON (1P)
Motor2.0L 8V TDI 103kW/138HP EDC16U31
Standaard vermogen140 CV / 103 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC16U31/U34/CP34
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Boost pressure 5
  • EGR valve control
  • EGR valve control 2
  • EGR valve control 3
  • EGR valve control 4
  • EGR valve control 5
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period - correction
  • Injection 1
  • Torque limiter
  • Smoke limiter
  • RPM limiter - fuel cut
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for fuel overheating
  • Protection for oil overheating
  • Driver torque request
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit

Firmware-identificatoren (14)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1037382439 1.67.01703G906021JE 0141 BOSCH EDC16U31/U34/CP34
1037387150 1.67.02203G906021JE 0141 BOSCH EDC16U31/U34/CP34
1037377150 1.67.01803G906021LL 9185 BOSCH EDC16U31/U34/CP34
1037389863 1.67.01903G906021SB 1455 BOSCH EDC16U31/U34/CP34
1037381350 1.67.06203G906021LL 9185 BOSCH EDC16U31/U34/CP34
1037379723 1.67.01403G906021LM 8505 BOSCH EDC16U31/U34/CP34
1037389867 1.67.01603G906021SG 1449 BOSCH EDC16U31/U34/CP34
1037381811 1.67.01603G906021JE 0057 BOSCH EDC16U31/U34/CP34
1037391575 1.67.02503G906021SG 1850 BOSCH EDC16U31/U34/CP34
1037390153 1.67.04803G906021LL 9850 BOSCH EDC16U31/U34/CP34
1037379722 1.67.02703G906021LL 8512 BOSCH EDC16U31/U34/CP34
1037381365 1.67.01903G906021LM 9190 BOSCH EDC16U31/U34/CP34
1037379461 1.67.02503G906021FR 8673 BOSCH EDC16U31/U34/CP34
1037389862 1.67.03003G906021SF 1454 BOSCH EDC16U31/U34/CP34

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.