SANTANA 300/350 1.6L HDI 66kW/89HP EDC16C34 — ECU BOSCH EDC16C34

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	SANTANA
Model	300/350
Motor	1.6L HDI 66kW/89HP EDC16C34
Standaard vermogen	90 CV / 66 kW
Cilinderinhoud	1600 cc
Brandstof	Diesel sovralimentato
Voertuigtype	Auto

ECU

Fabrikant	BOSCH
Model	EDC16C34
Geheugen / EPROM	M58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Boost pressure in aftertreatment modes
Boost pressure F (temperature)
EGR valve control
EGR valve control 2
Basic torque management at engine cranking
Injection period
Injection period 2
Injection opening time related to inj. pressure
Injection opening time related to inj. pressure 2
Injection period in aftertreatment modes
Max injection limit
Max injection limit - limp mode
J
Injection in aftertreatment modes 1
Injection in aftertreatment modes 2
Injection in aftertreatment modes 3
Torque limiter 2
Torque limiter
Lambda value of the smoke limitation
Injection quantity for engine overheating protection
Protection for fuel overheating
Pressure control map over pressure regulating valve
Specific injection pressure limiter
Specific injection pressure limiter for EFT sensor
Specific injection pressure
Specific injection pressure in aftertreatment modes
Specific pressure injection after starting
Air mass flow
Driver torque request
Driver torque request 2
Driver torque request for high speed - AT
Driver torque request for low speed - AT
Driver torque request for reverse gear
CAT downstream temperature sensor characterization
Torque limiter for the 1st gear selected
Torque limiter for the 2nd gear selected
Torque limiter for the 3rd gear selected
Torque limiter for the 4th gear selected
Torque limiter for the 5th gear selected
Torque limiter for the 6th gear selected
Torque limiter for selected gear - AT
Torque limiter for the APS/BPS
Torque limiter in recovery mode
Variable geometry duty cycle limit
Variable geometry duty cycle limit in regeneration mode
Variable geometry duty cycle limit in regeneration mode 2

Firmware-identificatoren (1)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
—	—	1.67.014	1037380725	BOSCH EDC16C34

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere SANTANA

PS10
2.8L 16V TD 85kW/114HP MS6.3

→ Alle ECU's SANTANA