RENAULT CLIO 3 1.2L 16V TCe 74kW/100HP SIM32

ECU CONTINENTAL-SIEMENS-VDO SIM32 · 101 CV (74 kW) · 1200 cc · Benzina sovralimentato

ECU-databaseRENAULT › RENAULT CLIO 3 1.2L 16V TCe 74kW/100HP SIM32

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelCLIO 3
Motor1.2L 16V TCe 74kW/100HP SIM32
Standaard vermogen101 CV / 74 kW
Cilinderinhoud1200 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIM32
Geheugen / EPROMMicro RENESAS - 4096 Kbit - 80000

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Boost pressure limiter
  • Boost pressure
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.73.012 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201109674 1.73.0248201043528 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015966 1.73.0048200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200942439 1.73.0278200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015965 1.73.0138200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200807653 1.73.0228200799199 CONTINENTAL-SIEMENS-VDO SIM32

ECU-notities

Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata