RENAULT CLIO 2 1.4L 16V 72kW/97HP SIRIUS34

ECU CONTINENTAL-SIEMENS-VDO SIRIUS 34 · 98 CV (72 kW) · 1400 cc · Benzina aspirato

ECU-databaseRENAULT › RENAULT CLIO 2 1.4L 16V 72kW/97HP SIRIUS34

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 16 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelCLIO 2
Motor1.4L 16V 72kW/97HP SIRIUS34
Standaard vermogen98 CV / 72 kW
Cilinderinhoud1400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIRIUS 34
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Advance correction
  • Weighting map cold-start
  • Injection at part load
  • Injection correction
  • RPM Limiter
  • Fuel mass injection at start up

Firmware-identificatoren (16)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
82000573118200169701 1.28.010 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200313137 1.28.004 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200214976 1.28.005 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200173881 1.28.017 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200214977 1.28.016 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200203410 1.28.007 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200214977 1.28.011 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200313149 1.28.006 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200313285 1.00.008 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200359444 1.00.009 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200189330 1.28.010 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200303364 1.00.006 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82003263758200326817 1.28.004 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82003263758200358036 1.28.007 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82003263758200326826 1.28.005 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82003267358200326809 1.28.005 CONTINENTAL-SIEMENS-VDO SIRIUS 34

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata