Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
7 firmwareversies
Voertuiggegevens
| Merk | PEUGEOT |
| Model | RANCH / PARTNER |
| Motor | 1.6L 16V HDI 55kW/74HP EDC16C34 |
| Standaard vermogen | 75 CV / 55 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C34 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure F (temperature)
- EGR valve control
- EGR valve control 2
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection period in aftertreatment modes
- Injection period in aftertreatment modes 2
- Injection period in aftertreatment modes 3
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Injection in aftertreatment modes 3
- L
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request 2
- Driver torque request for high speed - AT
- Driver torque request for low speed - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit in regeneration mode
- Variable geometry duty cycle limit in regeneration mode 2
- Variable geometry duty cycle limit in regeneration mode 3
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.67.011 | 1037391702 |
BOSCH EDC16C34 |
| — | — |
1.67.014 | 1039398224 |
BOSCH EDC16C34 |
| — | — |
1.67.027 | 1037383736 |
BOSCH EDC16C34 |
| — | — |
1.67.014 | 1037377715 |
BOSCH EDC16C34 |
| — | — |
1.67.019 | 1039398225 |
BOSCH EDC16C34 |
| — | — |
1.67.006 | 1039398224 |
BOSCH EDC16C34 |
| — | — |
1.67.009 | 1039398221 |
BOSCH EDC16C34 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
