PEUGEOT BIPPER 1.3L 16V MJET 55kW/74HP MJ8DF/8F2
ECU MARELLI MJD8F2 · 75 CV (55 kW) · 1300 cc · Diesel sovralimentato
ECU-database ›
PEUGEOT › PEUGEOT BIPPER 1.3L 16V MJET 55kW/74HP MJ8DF/8F2
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 16 firmwareversies
Verkrijg het bestand voor dit voertuig
Voertuiggegevens
| Merk | PEUGEOT |
| Model | BIPPER |
| Motor | 1.3L 16V MJET 55kW/74HP MJ8DF/8F2 |
| Standaard vermogen | 75 CV / 55 kW |
| Cilinderinhoud | 1300 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | MARELLI |
| Model | MJD8F2 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Engine efficiency
- EGR valve control
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- L
- Torque limiter
- Lambda value of the smoke limitation
- Max torque profile
- Rail pressure threshold for torque limitation
- Specific injection pressure
- Air mass flow
- RPM step reference
- Driver torque request
- Driver torque request Sport mode
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle - steady state
- Variable geometry duty cycle - transient state
Firmware-identificatoren (16)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| MJ8DFHW00P | 9744F192 | 1.01.012 | — | MARELLI MJD8F2 |
| MJ8DFHW00P | 9744F190 | 1.01.009 | — | MARELLI MJD8F2 |
| MJ8DFHW00P | 9743F487 | 1.01.023 | — | MARELLI MJD8F2 |
| MJ8DFHW00P | 9743F187 | 1.01.013 | — | MARELLI MJD8F2 |
| MJ8F3HW10P | 1942F121 | 1.00.006 | — | MARELLI MJD8F3 |
| MJ8F3HW10P | 1941F720 | 1.01.009 | — | MARELLI MJD8F3 |
| MJ8F3HW10P | 2442F630 | 1.01.010 | — | MARELLI MJD8F3 |
| MJ8F3HW10P | 1941F620 | 1.01.011 | — | MARELLI MJD8F3 |
| MJ8F3HW10P | 254AF710 | 1.01.003 | — | MARELLI MJD8F3 |
| MJ8F3HW10P | 2540F631 | 1.00.010 | — | MARELLI MJD8F3 |
| MJ8F3HW10P | 2540F731 | 1.00.013 | — | MARELLI MJD8F3 |
| MJ8F3HW20P | 3044QA05 | 1.01.012 | — | MARELLI MJD8F3 |
| MJ8F3HW20P | 304BQA12 | 1.01.007 | — | MARELLI MJD8F3 |
| MJ8F3HW20P | 304BQG12 | 1.01.003 | — | MARELLI MJD8F3 |
| MJ8F3HW20P | 2841QA44 | 1.01.010 | — | MARELLI MJD8F3 |
| MJ8F3HW20P | 2841Q944 | 1.01.008 | — | MARELLI MJD8F3 |
Technische voertuignotities
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
Microprocessor FMPC 5565 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
