PEUGEOT 407 1.6L HDI 81kW/110HP EDC16C34

ECU BOSCH EDC16C34 · 110 CV (81 kW) · 1600 cc · Diesel sovralimentato

ECU-databasePEUGEOT › PEUGEOT 407 1.6L HDI 81kW/110HP EDC16C34

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 25 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model407
Motor1.6L HDI 81kW/110HP EDC16C34
Standaard vermogen110 CV / 81 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC16C34
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Boost pressure in aftertreatment modes 2
  • Boost pressure F (temperature)
  • EGR valve control
  • EGR valve control 2
  • Basic torque management at engine cranking
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection period in aftertreatment modes
  • Injection period in aftertreatment modes 2
  • Injection period in aftertreatment modes 3
  • Max injection limit
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Injection in aftertreatment modes 2
  • Injection in aftertreatment modes 3
  • Torque limiter 2
  • Torque limiter
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Air mass flow
  • Driver torque request
  • Driver torque request for high speed - AT
  • Driver torque request for low speed - AT
  • Driver torque request for reverse gear
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear - AT
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Take-off torque law in Normal mode
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit in regeneration mode
  • Variable geometry duty cycle limit in regeneration mode 2

Firmware-identificatoren (25)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.67.0141039398248 BOSCH EDC16C34
1.67.0121037377754 BOSCH EDC16C34
1.67.0091037386129 BOSCH EDC16C34
1.67.0181039398218 BOSCH EDC16C34
1.67.0181037386144 BOSCH EDC16C34
1.67.0031037381894 BOSCH EDC16C34
1.67.0221037375958 BOSCH EDC16C34
1.67.0121037380720 BOSCH EDC16C34
1.67.0211037375532 BOSCH EDC16C34
1.67.0211037395393 BOSCH EDC16C34
1.67.0191037375518 BOSCH EDC16C34
1.67.012 BOSCH EDC16C34
1.67.0141037393451 BOSCH EDC16C34
1.67.0171037393451 BOSCH EDC16C34
1.67.0241037377754 BOSCH EDC16C34
1.67.0171037372282 BOSCH EDC16C34
1.67.0161037386144 BOSCH EDC16C34
1.67.0141037381894 BOSCH EDC16C34
1.67.0131037375958 BOSCH EDC16C34
1.67.0141037377754 BOSCH EDC16C34
1.67.0031037375958 BOSCH EDC16C34
1.67.0111037386129 BOSCH EDC16C34
1.67.0291037374956 BOSCH EDC16C34
1.67.0161037380721 BOSCH EDC16C34
1.67.0031037377754 BOSCH EDC16C34

Technische voertuignotities

OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata