PEUGEOT 308 (T7) 2.0L 16V HDI 110kW/150HP DCM3.5

ECU DELPHI DCM3.5 · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU-databasePEUGEOT › PEUGEOT 308 (T7) 2.0L 16V HDI 110kW/150HP DCM3.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model308 (T7)
Motor2.0L 16V HDI 110kW/150HP DCM3.5
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM3.5
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection opening time related to inj. pressure
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter
  • Torque limiter for smoke limitation
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Air mass flow
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Torque model - fuel quantity to torque conversion
  • Torque model - torque to fuel quantity conversion
  • Variable geometry duty cycle limit

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
96669125809666912580 1.81.0069678914580 DELPHI DCM3.5
96669125809666912580 1.81.0069678895180 DELPHI DCM3.5
96669125809666912580 1.81.0049667378380 DELPHI DCM3.5
96669125809666912580 1.81.0079678914680 DELPHI DCM3.5

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata