PEUGEOT 307 1.6L 16V 83kW/111HP ME7.4.9

ECU BOSCH ME7.4.9 · 113 CV (83 kW) · 1600 cc · Benzina aspirato

ECU-databasePEUGEOT › PEUGEOT 307 1.6L 16V 83kW/111HP ME7.4.9

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model307
Motor1.6L 16V 83kW/111HP ME7.4.9
Standaard vermogen113 CV / 83 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4.9
Geheugen / EPROMMICRO ST - 6656 Kbit

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Load/throttle position reference - AT
  • Air mass flow
  • Driver torque request
  • Injection correction Lambda sensor 1

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612012131037504429 1.88.0069663877880 BOSCH ME7.4.9
02612013441037386654 1.88.0079663309280 BOSCH ME7.4.9
0261S047331037504531 1.88.0049667089580 BOSCH ME7.4.9
0261S047331037397935 1.88.0029665548480 BOSCH ME7.4.9
0261S047341037504428 1.88.0049667089280 BOSCH ME7.4.9
0261S047341037398707 1.88.0019666186680 BOSCH ME7.4.9
0261S063651037511563 1.88.0019667179380 BOSCH ME7.4.9
0261S069231037512853 1.88.0029667379780 BOSCH ME7.4.9
0261S072741037515703 1.88.0029678225380 BOSCH ME7.4.9

Technische voertuignotities

OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.

ECU-notities

Microprocessor ST10F275 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection
Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection
Microprocessor ST10F275 To work on this ECU you can use NewTrasdata WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection This Setting File can be used for serial system : Genius or NewGenius.