Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 3 firmwareversies
Voertuiggegevens
| Merk | OPEL / SATURN / VAUXHALL |
| Model | CORSA E |
| Motor | 1.2L 16V 63kW/85HP DELCO E78 |
| Standaard vermogen | 86 CV / 63 kW |
| Cilinderinhoud | 1200 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Auto |
ECU
| Fabrikant | DELCO |
| Model | E78 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000 |
Beschikbare tuning-opties:
- Engine ignition timing versus temperature
- Advance at idle speed
- Lambda/AFR full load/WOT
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Requested spark advance - high octane
- Requested spark advance - low octane
- Desired engine load calculation
- Variable exhaust camshaft timing 2
- Variable exhaust camshaft timing
- ECT for fan engagement
- Engine idle
- Engine idle in Park position
- Variable intake camshaft timing 2
- Variable intake camshaft timing
- Torque limiter 2
- Torque limiter
- Lambda enrichment - open loop
- RPM Limiter
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
Firmware-identificatoren (3)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 12647136 | 12665803 |
1.91.007 | 55494408 |
DELCO E78 |
| 12647136 | 12655492 |
1.35.009 | 55594852 |
DELCO E78 |
| 12647136 | 12665803 |
1.91.007 | 55489618 |
DELCO E78 |
Technische voertuignotities
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
