OPEL / SATURN / VAUXHALL CORSA E 1.0L 16V TURBO 67kW/90HP DELCO E80

ECU DELCO E80 · 91 CV (67 kW) · 1000 cc · Benzina sovralimentato

ECU-databaseOPEL / SATURN / VAUXHALL › OPEL / SATURN / VAUXHALL CORSA E 1.0L 16V TURBO 67kW/90HP DELCO E80

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkOPEL / SATURN / VAUXHALL
ModelCORSA E
Motor1.0L 16V TURBO 67kW/90HP DELCO E80
Standaard vermogen91 CV / 67 kW
Cilinderinhoud1000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELCO
ModelE80
Geheugen / EPROMMicro BGA ST MPC5676 - 600000

Beschikbare tuning-opties:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Boost pressure
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle vs. ECT sensor
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Throttle angle management
  • WG duty cycle vs RPM and boost

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1265368112677775 1.91.00755495446 DELCO E80
1265368112672375 1.91.01655494383 DELCO E80

ECU-notities

Microprocessor MPC5676R This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata