Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 21 firmwareversies
Voertuiggegevens
| Merk | OPEL / SATURN / VAUXHALL |
| Model | ANTARA |
| Motor | 2.0L 16V CDTI 110kW/148HP EDC16C39 |
| Standaard vermogen | 150 CV / 11 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C39 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Torque limiter 3
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limit table for IAT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Volumetric efficiency
- Volumetric efficiency - correction
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware-identificatoren (21)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 0123456789P465.V60 |
1.67.019 | DBM460O4M1 |
BOSCH EDC16C39 |
| — | 1037381795P465_V44 |
1.67.014 | DAA444O4M7 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.022 | DAM450O4M6 |
BOSCH EDC16C39 |
| — | 96950947 P465_V66 |
1.67.023 | DAM466S4M2 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.026 | DAA466O4M3 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.016 | DAM466O4M2 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.002 | DAM450O4M5 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.009 | DAA466O4M4 |
BOSCH EDC16C39 |
| — | 0123456789P465.V60 |
1.67.004 | DAA460O4M3 |
BOSCH EDC16C39 |
| — | 96950947 P465_V66 |
1.67.017 | DAA466N4M2 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.015 | DAA450O4M1 |
BOSCH EDC16C39 |
| — | 0123456789P465.V60 |
1.67.017 | DAM460S4M4 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.015 | DAM466S4M1 |
BOSCH EDC16C39 |
| — | 25181343 P465_V70 |
1.67.017 | DAA470O4M1 |
BOSCH EDC16C39 |
| — | 96950947 P465_V66 |
1.67.005 | DAM466U4M2 |
BOSCH EDC16C39 |
| — | 0123456789P465.V60 |
1.67.022 | DAA460S4M4 |
BOSCH EDC16C39 |
| — | 1037376659P465_V4B |
1.67.017 | DAA44BO4M1 |
BOSCH EDC16C39 |
| — | 25181343 P465_V70 |
1.67.019 | DAM270O4M2 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.029 | DAA450O4M1 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.002 | DAA450O4M4 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.009 | DAM466O4M3 |
BOSCH EDC16C39 |
Technische voertuignotities
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
