MV AGUSTA F4 1000 RR 12->15 148kW

ECU ELDOR NEMO 2.0 · 201 CV (148 kW) · 1000 cc · Benzina aspirato

ECU-databaseMV AGUSTA › MV AGUSTA F4 1000 RR 12->15 148kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 15 firmwareversies

Voertuiggegevens

MerkMV AGUSTA
ModelF4 1000 RR
Motor12->15 148kW
Standaard vermogen201 CV / 148 kW
Cilinderinhoud1000 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantELDOR
ModelNEMO 2.0
Geheugen / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Advance correction cylinder 2
  • Base timing
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Speed limiter
  • Air mass flow
  • Driver torque request
  • Driver torque request - MT
  • Requested torque map set 2
  • Requested torque map set 3
  • Throttle angle management

Firmware-identificatoren (15)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
M3M44R-0516 1.00.0040516FY39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0070516FD39 ELDOR NEMO 2.0
M3M44R-0515 1.00.0030515F038 ELDOR NEMO 2.0
M3M44R-0515 1.00.0030515FB38 ELDOR NEMO 2.0
M3M44R-0509 1.00.0040509FL34 ELDOR NEMO 2.0
M3M44R-0515 1.00.0110515FD38 ELDOR NEMO 2.0
M3M44R-0509 1.00.0070509FF35 ELDOR NEMO 2.0
M3A35R-0904 1.00.0060904DY53 ELDOR NEMO 2.0
M3M44R-0509 1.00.0080509FD34 ELDOR NEMO 2.0
M3M44R-0516 1.00.0100516FF39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FE39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FG39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FL39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FU39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FX39 ELDOR NEMO 2.0

Technische voertuignotities

OBD placed under the saddle

ECU-notities

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.