MV AGUSTA F3 800 17->20 109kW

ECU ELDOR NEMO 2.0 · 148 CV (109 kW) · 800 cc · Benzina aspirato

ECU-databaseMV AGUSTA › MV AGUSTA F3 800 17->20 109kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 14 firmwareversies

Voertuiggegevens

MerkMV AGUSTA
ModelF3 800
Motor17->20 109kW
Standaard vermogen148 CV / 109 kW
Cilinderinhoud800 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantELDOR
ModelNEMO 2.0
Geheugen / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Advance correction cylinder 2
  • Base timing
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Speed limiter
  • Air mass flow
  • Driver torque request
  • Driver torque request - MT
  • Requested torque map set 2
  • Requested torque map set 3
  • Throttle angle management

Firmware-identificatoren (14)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
M3A36R-0911 1.00.0030911P014 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911PB14 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911PK14 ELDOR NEMO 2.0
M3A36R-0910 1.00.0050910P013 ELDOR NEMO 2.0
M3A36R-0910 1.00.0030910PB13 ELDOR NEMO 2.0
M3A36R-0910 1.00.0030910PC13 ELDOR NEMO 2.0
M3A36R-0910 1.00.0030910PK13 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913P015 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PB15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PB16 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PC15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PK15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PK16 ELDOR NEMO 2.0
M3A36R-0911 1.00.0060911PC14 ELDOR NEMO 2.0

Technische voertuignotities

OBD placed under the saddle

ECU-notities

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.