MV AGUSTA F3 800 13->16 109kW

ECU ELDOR NEMO 2.0 · 148 CV (109 kW) · 800 cc · Benzina aspirato

ECU-databaseMV AGUSTA › MV AGUSTA F3 800 13->16 109kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 17 firmwareversies

Voertuiggegevens

MerkMV AGUSTA
ModelF3 800
Motor13->16 109kW
Standaard vermogen148 CV / 109 kW
Cilinderinhoud800 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantELDOR
ModelNEMO 2.0
Geheugen / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Advance correction cylinder 2
  • Base timing
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Speed limiter
  • Air mass flow
  • Driver torque request
  • Driver torque request - MT
  • Requested torque map set 2
  • Requested torque map set 3
  • Throttle angle management

Firmware-identificatoren (17)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
M3M34R-0515 1.00.0090515T032 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TA26 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TA33 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TB26 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TB33 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TC26 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TC33 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TE33 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TG26 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TG33 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TK27 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516TK34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0080516T033 ELDOR NEMO 2.0
M3M34R-0515 1.00.0030515T025 ELDOR NEMO 2.0
M3M34R-0516 1.00.0080516T026 ELDOR NEMO 2.0
M3M34R-0509 1.00.0110509T022 ELDOR NEMO 2.0
M3M34R-0516 1.00.0080516TE26 ELDOR NEMO 2.0

Technische voertuignotities

OBD placed under the saddle

ECU-notities

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.