MV AGUSTA BRUTALE 675 11->15 85kW

ECU ELDOR NEMO 2.0 · 116 CV (85 kW) · 675 cc · Benzina aspirato

ECU-databaseMV AGUSTA › MV AGUSTA BRUTALE 675 11->15 85kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 17 firmwareversies

Voertuiggegevens

MerkMV AGUSTA
ModelBRUTALE 675
Motor11->15 85kW
Standaard vermogen116 CV / 85 kW
Cilinderinhoud675 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantELDOR
ModelNEMO 2.0
Geheugen / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Advance correction cylinder 2
  • Base timing
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Speed limiter
  • Air mass flow
  • Driver torque request
  • Driver torque request - MT
  • Requested torque map set 2
  • Requested torque map set 3
  • Throttle angle management

Firmware-identificatoren (17)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
M3M34R-0516 1.00.0040516N034 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516N041 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NA34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NB41 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NC34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NC41 ELDOR NEMO 2.0
M3M34R-0516 1.00.0050516ND34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NF34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NF41 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NG34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NG41 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NH34 ELDOR NEMO 2.0
M3M34R-0510 1.00.0020510NF33 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NH41 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NJ41 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NW34 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516NW41 ELDOR NEMO 2.0

Technische voertuignotities

OBD placed under the saddle

ECU-notities

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.