MAZDA 3 (BM) 2.0L 16V SKYACTIV-G 88kW/118HP DENSO

ECU DENSO MB_MH8501_GGD · 120 CV (88 kW) · 2000 cc · Benzina aspirato

ECU-databaseMAZDA › MAZDA 3 (BM) 2.0L 16V SKYACTIV-G 88kW/118HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 8 firmwareversies

Voertuiggegevens

MerkMAZDA
Model3 (BM)
Motor2.0L 16V SKYACTIV-G 88kW/118HP DENSO
Standaard vermogen120 CV / 88 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
ModelMB_MH8501_GGD
Geheugen / EPROMMICRO MITSUBISHI - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Minimum advance allowed
  • Minimum advance allowed - high octane
  • Minimum advance allowed - low octane
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Enrichment for closed loop
  • Exhaust gas temperature
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint for ECT sensor
  • RPM Limiter
  • RPM Limiter 2
  • Speed limiter
  • MAF calibration vs voltage
  • Max torque profile
  • Max torque profile in Sport mode
  • Enrichment for open loop
  • Specific injection pressure
  • Driver torque request
  • Throttle angle management
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
P5BX-188K1-PSR8-18881-B 1.00.008PSR8-188K2-B DENSO MB_MH8501_GGD
P5BX-188K1-PSAA-18881-B 1.00.005PSAA-188K2-B DENSO MB_MH8501_GGD
P5BX-188K1-PSAA-18881-C 1.00.005PSAA-188K2-C DENSO MB_MH8501_GGD
P5CB-188K1-PSAB-18881-B 1.00.005PSAB-188K2-B DENSO MB_MH8501_GGD
PE11-188K1-PE11-18881-E 1.00.011PE11-188K2-E DENSO MB_MH8501_GGD
PELT-188K1-PS6N-18881-C 1.00.005PS6N-188K2-C DENSO MB_MH8501_GGD
PELT-188K1-PS6N-18881-B 1.00.008PS6N-188K2-B DENSO MB_MH8501_GGD
PELW-188K1-PYJW-18881-C 1.00.009PYJW-188K2-C DENSO MB_MH8501_GGD

ECU-notities

Microprocessor MH8501F This Setting File can be used for serial system NewGenius.