MAZDA 3 (BK) 1.6L 16V MZR-CD 80kW/107HP EDC16+

ECU BOSCH EDC16C34 · 109 CV (8 kW) · 1600 cc · Diesel sovralimentato

ECU-databaseMAZDA › MAZDA 3 (BK) 1.6L 16V MZR-CD 80kW/107HP EDC16+

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 21 firmwareversies

Voertuiggegevens

MerkMAZDA
Model3 (BK)
Motor1.6L 16V MZR-CD 80kW/107HP EDC16+
Standaard vermogen109 CV / 8 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC16C34
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure in aftertreatment modes
  • Boost pressure F (temperature)
  • EGR valve control
  • EGR valve control 2
  • Basic torque management at engine cranking
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Injection period in aftertreatment modes
  • Injection period in aftertreatment modes 2
  • Injection period in aftertreatment modes 3
  • Max injection limit
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Injection in aftertreatment modes 2
  • Torque limiter 2
  • Torque limiter
  • Lambda value of the smoke limitation
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Air mass flow
  • Driver torque request
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear - AT
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Variable geometry duty cycle limit in regeneration mode

Firmware-identificatoren (21)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1037378487 1.67.0141037391373 BOSCH EDC16C34
1037380497 1.67.0071037382744 BOSCH EDC16C34
1037382744 1.67.0191037382744 BOSCH EDC16C34
1037378487 1.67.0081037380497 BOSCH EDC16C34
1037374401 1.67.0081037382491 BOSCH EDC16C34
1037382744 1.67.0071037380497 BOSCH EDC16C34
1037380497 1.67.0141037380497 BOSCH EDC16C34
1037379069 1.67.0121037380497 BOSCH EDC16C34
1037374401 1.67.0131037400536 BOSCH EDC16C34
1037382744 1.67.0101037400536 BOSCH EDC16C34
1037379069 1.67.0131037391373 BOSCH EDC16C34
1037382742 1.67.0141037382742 BOSCH EDC16C34
1037379069 1.67.0151037382491 BOSCH EDC16C34
1037400536 1.67.0181037400536 BOSCH EDC16C34
1037398941 1.67.0091037400536 BOSCH EDC16C34
1037376265 1.67.0061037383314 BOSCH EDC16C34
1037379069 1.67.0211037379069 BOSCH EDC16C34
1037382744 1.67.0091037541463 BOSCH EDC16C34
1037374401 1.67.0091037545935 BOSCH EDC16C34
1037374401 1.67.0071037541463 BOSCH EDC16C34
1037382744 1.67.0111037391373 BOSCH EDC16C34

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):