MARCHETTI MOBILE CRANE MG 5530 8.7L 260kW/349HP EDC7UC31
ECU BOSCH EDC7UC31 · 354 pk (260 kW) · 8700 cc · Diesel sovralimentato
Firmware-identificatoren: P340V91 Mjmtbn06.ma0
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
Wat je voor dit voertuig kunt bestellen
Origineel ECU-bestand BOSCH EDC7UC31
30 credits
Het standaardbestand voor deze ECU.
Registreer gratis en bestelStage 1-bestand
vanaf 100 credits
Levering binnen 1-2 uur (tijdens werkuren). Levenslange garantie op het bestand.
Registreer gratis en bestelUitschakelingen en opties
Voeg ze toe aan het bestand of bestel ze los.
→ Bekijk de volledige prijslijst
Registreer gratis en bestelZo bestel je: gratis registratie, upload het originele bestand dat uit de ECU is gelezen en kies de dienst. 1 credit = € 1.
Het uitschakelen van emissiesystemen is uitsluitend bedoeld voor wedstrijd- en circuitvoertuigen, niet voor gebruik op de openbare weg.
Voertuiggegevens
| Merk | MARCHETTI |
| Model | MOBILE CRANE |
| Motor | MG 5530 8.7L 260kW/349HP EDC7UC31 |
| Standaard vermogen | 354 pk / 260 kW |
| Cilinderinhoud | 8700 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Ohv |
ECU
| Fabrikant | BOSCH |
| Model | EDC7UC31 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
→ ECU Bosch EDC7UC31: alle voertuigen, firmwarenummers en diensten · Alle ECU-families
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Turbocharger volumetric efficiency
Firmware-identificatoren (1)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| — | — | 1.67.006 | P340V91 Mjmtbn06.ma0 | BOSCH EDC7UC31 |