LOTUS ELISE S3 1.6L 16V 100kW/134HP EFI T6E

ECU EFI T6E · 136 CV (1 kW) · 1600 cc · Benzina aspirato

ECU-databaseLOTUS › LOTUS ELISE S3 1.6L 16V 100kW/134HP EFI T6E

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 1 firmwareversies

Voertuiggegevens

MerkLOTUS
ModelELISE S3
Motor1.6L 16V 100kW/134HP EFI T6E
Standaard vermogen136 CV / 1 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantEFI
ModelT6E
Geheugen / EPROMMICRO BGA MOTOROLA FRESCALE con FLASH interna 8192 Kbit - 0x100000

Beschikbare tuning-opties:

  • Base timing
  • Camshaft maximum lift
  • Lambda correction
  • Lambda Correction 2
  • Main injection
  • Fan activation threshold stage 1
  • Fan activation threshold stage 2
  • Fan activation threshold with engine off
  • VANOS inlet CAM
  • Volumetric efficiency
  • VANOS exhaust CAM

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
B132E0008FC120E0104 1.00.009 EFI T6E

ECU-notities

Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop