JAGUAR E-PACE (X540) D180 2.0L 16V 132kW/177HP MEDC17.9

ECU BOSCH MEDC17.9 · 180 CV (132 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseJAGUAR › JAGUAR E-PACE (X540) D180 2.0L 16V 132kW/177HP MEDC17.9

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 15 firmwareversies

Voertuiggegevens

MerkJAGUAR
ModelE-PACE (X540)
MotorD180 2.0L 16V 132kW/177HP MEDC17.9
Standaard vermogen180 CV / 132 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMEDC17.9
Geheugen / EPROMMICRO ST TRICORE - 32768 - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • Maximum torque at gear selection
  • Maximum torque limitation at clutch
  • Max accepted exhaust gas temperature value after turbine
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Max accepted exhaust gas temperature value at particulate sensor
  • Protection for engine overheating
  • Engine reference power at crankshaft
  • Basic torque management at engine cranking
  • Engine idle
  • Gearbox maximum torque allowed
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • J
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 5
  • Torque limiter
  • Lambda value of the smoke limitation
  • Maximum indicated torque
  • Maximum engine torque at crank shaft
  • Maximum valid simulated soot mass
  • Specific injection pressure limiter
  • Relative permissible torque from the pedal position in torque limitation
  • Specific injection pressure
  • Specific injection pressure 2
  • Driver torque request
  • Driver torque request for high speed
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limiter for EFT sensor
  • Variable geometry duty cycle limit

Firmware-identificatoren (15)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
GX73-12B684-FABHX73-14C204-FFE 1.94.011J9C3-12K532-KCE BOSCH MEDC17.9
GX73-12B684-FABHX73-14C204-FFE 1.94.008J9C3-12K532-KCF BOSCH MEDC17.9
GX73-12B684-FBBHX73-14C204-FHE 1.94.006J9C3-12K532-KHC BOSCH MEDC17.9
HY32-12B684-FBAH7A3-14C204-FDD 1.94.008JX73-12K532-FCG BOSCH MEDC17.9
HY32-12B684-FBAH7A3-14C204-FDD 1.94.010JK83-12K532-FCF BOSCH MEDC17.9
HY32-12B684-FBAH7A3-14C204-FDC 1.94.013JK83-12K532-GBE BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBC 1.94.010K9C3-12K532-FBG BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBC 1.94.009K9C3-12K532-FCF BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FCB 1.94.003K9C3-12K532-GAD BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBC 1.94.009K9C3-12K532-FBE BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBC 1.94.008K9C3-12K532-FCG BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBB 1.94.003K9C3-12K532-FBC BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBC 1.94.002K9C3-12K532-GAF BOSCH MEDC17.9
KK72-12B684-FBAKK72-14C204-FBC 1.94.009K9C3-12K532-GAJ BOSCH MEDC17.9
KY32-12B684-FBAKK83-12K532-GCJ 1.00.002KK83-12K532-GCJ BOSCH MEDC17.9

ECU-notities

MICRO Infineon Tricore TC1793 This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop