IVECO DAILY MY 2006 2.3L 78kW/105HP EDC16C39

ECU BOSCH EDC16C39 · 106 CV (78 kW) · 2300 cc · Diesel sovralimentato

ECU-databaseIVECO › IVECO DAILY MY 2006 2.3L 78kW/105HP EDC16C39

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 9 firmwareversies

Voertuiggegevens

MerkIVECO
ModelDAILY MY 2006
Motor2.3L 78kW/105HP EDC16C39
Standaard vermogen106 CV / 78 kW
Cilinderinhoud2300 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantBOSCH
ModelEDC16C39
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • EGR valve control
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Max injection limit for APS/BPS sensor
  • Fuel quantity limitation after cold start
  • Max injection limit - limp mode
  • J
  • Injection 2
  • Torque limiter 2
  • Torque limiter 3
  • Boost pressure deviation limits for basic charge air pressure
  • Boost pressure deviation limits for basic charge air pressure 2
  • Torque limiter
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature limit - heater control
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature limit - heater control
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Injection quantity for engine overheating protection
  • Injection quantity for engine overheating protection 3
  • Protection for fuel overheating
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Volumetric efficiency
  • Volumetric efficiency - correction
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810121931037500314P315V920 1.67.005A078270W4LFA0V92P28.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.005A078270W4LCA0V92P26.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.006A078270W4LF50V92P28.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.005A078270W4LCA0V92P28.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.004A078270W4LFA0V92P26.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.015A078270W4LC50V92P26.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.028A078270W4LC50V92P26.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.009A078270W4LC50V92P28.HEX BOSCH EDC16C39
02810121931037500314P315V920 1.67.009A078270W4LF50V92P26.HEX BOSCH EDC16C39

ECU-notities

This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop