Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
12 firmwareversies
Voertuiggegevens
| Merk | HYUNDAI |
| Model | SONATA |
| Motor | 2.0L CRDi 103kW/138HP EDC16+ |
| Standaard vermogen | 140 CV / 103 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C39 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Maximum indicated torque
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware-identificatoren (12)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 1037383126 |
1.67.019 | P373A00I |
BOSCH EDC16C39 |
| — | RBKRS00058 |
1.67.008 | P373C00I |
BOSCH EDC16C39 |
| — | 1037390028 |
1.67.011 | P373E20I |
BOSCH EDC16C39 |
| — | 1037379788 |
1.67.019 | P373701I |
BOSCH EDC16C39 |
| — | RBKRS00098 |
1.67.016 | P373C00I |
BOSCH EDC16C39 |
| — | 1037390089 |
1.67.023 | P373C00I |
BOSCH EDC16C39 |
| — | 1037379788 |
1.67.014 | P373701I |
BOSCH EDC16C39 |
| — | 1037383126 |
1.67.012 | P373A00I |
BOSCH EDC16C39 |
| — | 1037506221 |
1.67.005 | P373F00I |
BOSCH EDC16C39 |
| — | 1037388094 |
1.67.018 | P373B11I |
BOSCH EDC16C39 |
| — | 1037388094 |
1.67.024 | P373B11I |
BOSCH EDC16C39 |
| — | 1037395897 |
1.67.016 | P373F00I |
BOSCH EDC16C39 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
