HONDA CIVIC (FC/FK) MK10 1.5L 16V Turbo i-VTEC 128kW/172HP KEIHIN

ECU KEIHIN 37820-5xx/6xx · 174 CV (128 kW) · 1500 cc · Benzina sovralimentato

ECU-databaseHONDA › HONDA CIVIC (FC/FK) MK10 1.5L 16V Turbo i-VTEC 128kW/172HP KEIHIN

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 8 firmwareversies

Voertuiggegevens

MerkHONDA
ModelCIVIC (FC/FK) MK10
Motor1.5L 16V Turbo i-VTEC 128kW/172HP KEIHIN
Standaard vermogen174 CV / 128 kW
Cilinderinhoud1500 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantKEIHIN
Model37820-5xx/6xx
Geheugen / EPROMMICRO ST TRICORE - 20480 Kbit - 280000

Beschikbare tuning-opties:

  • Air mass quantity correction
  • Base timing
  • Minimum advance allowed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Advance correction
  • Knock correction advance max
  • Advance correction for IAT sensor
  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Threshold for wastegate operation
  • Boost pressure
  • Turbo pressure - EGT 0°C
  • Turbo pressure - EGT 1100°C
  • Turbo pressure - EGT 250°C
  • Turbo pressure - EGT 400°C
  • Turbo pressure - EGT 550°C
  • Turbo pressure - EGT 700°C
  • Turbo pressure - EGT 900°C
  • Lambda correction
  • Maximum torque limitation at clutch
  • Load / throttle position reference
  • Driver torque limit for clutch protection
  • Desired boost pressure
  • Exhaust gas temperature
  • Exhaust valves lift
  • Exhaust valves lift - full load
  • Exhaust valves lift - IVL 0°
  • Exhaust valves lift - IVL 15°
  • EVLIVL
  • Exhaust valves lift - IVL 40°
  • Exhaust valves lift - IVL 50°
  • Exhaust valves lift - IVL 60°
  • Weighting map cold-start
  • Max torque correction factor for knock sensor
  • Engine idle vs. ECT sensor
  • Injection - IVL 0°
  • Injection - IVL 15°
  • Injection - IVL 30°
  • IIVL
  • Injection - IVL 50°
  • Injection - IVL 60°
  • Intake valve lift
  • Speed / RPM limiter
  • Torque limiter 2
  • Lambda/AFR - closed loop
  • Lambda/AFR sensor calibration
  • Torque limiter
  • Torque limiter - AT
  • RPM Limiter
  • RPM Limiter 2
  • Lambda/AFR limit - closed loop
  • Speed limiter
  • Speed limiter 2
  • MAF sensor calibration
  • Specific injection pressure
  • Driver torque request
  • Driver torque request 2
  • Driver torque request 3
  • Throttle angle limitation
  • Throttle angle limitation 2
  • Variable geometry duty cycle limit

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
37805-5AG-P610 1.73.003 KEIHIN 37820-5xx/6xx
37805-5AG-S830 1.73.006 KEIHIN 37820-5xx/6xx
37805-5AA-M610 1.73.014 KEIHIN 37820-5xx/6xx
37805-5AA-A570 1.73.002 KEIHIN 37820-5xx/6xx
37805-5AA-P510 1.73.012 KEIHIN 37820-5xx/6xx
37805-5AA-M520 1.73.010 KEIHIN 37820-5xx/6xx
37805-5AF-H830 1.73.013 KEIHIN 37820-5xx/6xx
37805-5AN-L650 1.73.024 KEIHIN 37820-5xx/6xx

ECU-notities

Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata