FIAT QUBO 1.3L 16V MJET 55kW/74HP MJD6F3

ECU MARELLI MJD6F3 · 75 CV (55 kW) · 1300 cc · Diesel sovralimentato

ECU-databaseFIAT › FIAT QUBO 1.3L 16V MJET 55kW/74HP MJD6F3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 12 firmwareversies

Voertuiggegevens

MerkFIAT
ModelQUBO
Motor1.3L 16V MJET 55kW/74HP MJD6F3
Standaard vermogen75 CV / 55 kW
Cilinderinhoud1300 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantMARELLI
ModelMJD6F3
Geheugen / EPROMSPANSION S29CL016J

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost pressure
  • EGR valve control
  • Gearbox maximum torque allowed
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Lambda value of the smoke limitation
  • Specific injection pressure limiter
  • Specific injection pressure
  • RPM step reference
  • Load STEP reference
  • Driver torque request
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor

Firmware-identificatoren (12)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
MJD6F3HW03P3546H780 1.00.003 MARELLI MJD6F3
MJD6F3HW04P3547HB80 1.00.007 MARELLI MJD6F3
MJD6F3HW04P3542H170 1.00.011 MARELLI MJD6F3
MJD6F3HW04P354BH794 1.00.009 MARELLI MJD6F3
MJD6F3HW04P3547H880 1.00.014 MARELLI MJD6F3
MJD6F3HW04P354BH994 1.00.010 MARELLI MJD6F3
MJD6F3HW04P3546HA80 1.00.004 MARELLI MJD6F3
MJD6F3HW04P354BHA96 1.00.002 MARELLI MJD6F3
MJD6F3HW04P3547H180 1.00.017 MARELLI MJD6F3
MJD6F3HW04P3546H980 1.00.012 MARELLI MJD6F3
MJD6F3HW04P3546H780 1.00.016 MARELLI MJD6F3
MJD6F3HW04P354BH895 1.00.008 MARELLI MJD6F3

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM SPANSION S29CL016J PQFP 80 Pin To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.